fbpx

Which Filter System Should Be Used In Ram Chimneys?

When working on viscose and cotton fabrics in the fabric production facility, pre-washing and desizing processes are carried out. Pre-washing is a part of the dyeing process and is a prerequisite for a healthy dyeing. The fabric balls that are pre-washed are passed through the raw cloth opening machine to be sent to the dyeing machines, the fabric balls are added to each other and transferred to the dyeing machines. Fabrics are dyed in two ways in dyeing machines: disperse and re-active dyeing. While re-active dyeing is used only for dyeing fabrics with cellulosic character, disperse dyeing is used for non-cellulosic fabrics. Desizing process is applied on polyester fabrics to be dyed in the facility. After dyeing the fabric, rinsing is performed and the fabric is laid on a rope opening machine.

For the purpose of drying, the fabric is transported to the Ramoz machine in a transverse direction, attached to its edges. Pressurized and humid hot air is sprayed on both surfaces of the stretched fabric and the fabric is dried with the help of a special vacuum device. Afterwards, the dried fabric is taken to the printing process and the fabrics that are removed from the printing are checked in quality control machines, packaged and made ready for shipment.

In the ram machines, the section where intense smoke, high temperature, humidity and odor occur is this section where fixation and drying processes are carried out.

Alp RXC series air cleaning units are designed by taking into account the pollutants such as intense oil smoke, odor, high temperature and VOC that occur in polyester and polyester elastane fabrics.

You will get rid of the dense smoke and oil that occur during the fixation phase in the ram machines immediately thanks to the pre-filter units, intermediate filter units and electrostatic filter units with specially designed Micro Kurairil system. You will also recover textile oils that cause smoke generation.

You can use it for years by washing the smoke and oil filter group without replacing it with a new one.

Pollutant factors such as CO carbon monoxide, NOX nitrogen oxides, SO2 sulfur dioxide, VOC dust and volatile organic compounds in the exhaust air after the drying phase in the ram machines create air emission that must be filtered. The main pollutant of odor emission is VOC, etc. are compounds.

Ozone filter and plasma filter units used in Alp RXC series air cleaning units It completely frees you from odor by eliminating compounds.

The high energy saving brought by the filtration system based on the purification of the flue gas obtained by Alp air cleaning units also provides environmental performance.